A O SMITH PROMAX – RESIDENTIAL ELECTRIC WATER HEATER

A O SMITH Central Water Heater Model – ECT – 80 / ECT – 120

Tall, short and lowboy models available.

• Commercial grade incoloy sheathed elements with Ni-Chrome resistance wire embedded in magnesium Range 1.5 to 4.5 kW, rated 230 Volt, suitable for 220-240 Volt power supply

• Surface mounted control thermostats with a temperature range from 43°C/110°F to maximum 71°C/160°F and hi-limit factory fixed setting at 83°C/180°F.
• Thermostats are accurate to ± 5°C/5°F.
• Diffuser dip tube carries incoming cold water from the top connection, to the bottom of the tank to minimize mixing with the hot water in the Helps reduce lime and sediment buildup while maximizing hot water output. Made from long-lasting PEX cross-linked polymer.
• Our Coregard™ magnesium anode rods have a stainless-steel core that extends the life of the anode rod allowing superior tank protection far longer than standard anode rods.
• Durable, tamper-resistant brass drain valve
• The internal pressure tank is constructed of heavy-duty carbon Maximum working pressure is rated at 150psi/10bar. Test pressure per UL 174 std is 300psi/20bar.
• Specially developed glass coating protects steel tank from corrosion and maximizes tank life.
• Factory installed, side-mounted, CSA/ASME certified T&P safety relief valve is standard on all models.

• All models are equipped with factory installed heat traps on the inlet and outlet connections to improve energy efficiency.

• Code compliance meets the Federal Energy Efficiency Standards according to the 2004 edition of the National Appliance Energy Conservation Act (NAECA) of 1992 and the standby loss requirements of the S. Department of Energy and Current Edition of ASHRAE/IES 90.1.
• Residential export water heaters comply with UL 174, GSO, PAI and IEC 60335-2-21. Only models with standard kW are registered for SASO energy labels
• Limited warranty 6 years on the tank and 1 year on the parts

A central water heater is a system designed to provide hot water to multiple points in a building, typically through a centralized heating unit that distributes the heated water to various fixtures, such as faucets, showers, and appliances. These systems are commonly used in larger homes, apartment buildings, or commercial establishments. There are several types of central water heating systems. America central water heater we Supply and install and repair central water heater for house in Al Wakra, Doha, Umm Salal, Rawdath Al Hammam, Al Kheesa, Qatar to provide hot water for all house during winter session:

Types of America Central Electric Water Heaters:

1. Tank (Storage) Water Heaters:
   • Central Water Heater Works: These are the most common type, consisting of a large insulated tank that stores hot water for central tank roof top. The water is heated by electricity, gas, or oil, and it remains in the tank until needed.
   • Pros: Simple, cost-effective, and reliable. Watertec Best seller in Qatar for Water Heater A o Smith, American Proline, Bradford, Rheem Central Water Heater for House in Qatar. Can provide a large volume of 50USG, 80USG, 120USG Central Water Heater for Commercial and Central Hot Water Heater for Domestic.
   • Cons: Can run out of hot water if demand exceeds the tank’s capacity. Energy consumption may be higher due to heat loss from the tank. Watertec provide more best quality and more competitive prices and one of best seller for central water heater in Qatar with low cost and quality service with 24 x 7
2. Central America Hot Water Heaters:
   • How it works: These systems heat water only when it’s needed, without storing it in a tank. They use gas or electricity to instantly heat water as it passes through the unit.
   • Pros: Energy-efficient, no risk of running out of hot water, compact design for domestic and best America central water heater available with lowest cost for customer’s satisfaction.
   • Cons: May not be able to supply hot water for multiple outlets simultaneously (unless you have a large capacity system or multiple units). Higher upfront cost.

Key Features of a Central Water Heater System:

• Storage Capacity: 50 USG, 80USG and 120USG, America central water heater for the volume of water the heater can store, typically measured in gallons (for tank water heaters).
• Energy Source: Can use electricity central water heat from Watertec with Free maintenance of 1 Years.
• Temperature Control: Most systems have thermostats to regulate water temperature, often adjustable. Watertec repair and replace the Central Water Heater thermostat, Heater Element for 1200kW, 3500kW, 4500kW, and 6000kW single phase Central Water Heater and 3 phase central water heater maintenance at customer’s door step.
• Insulation: Insulated tanks or pipes help reduce heat loss and increase energy efficiency.
• Size & Location: America Central water heaters often need to be located in a utility room, basement, or mechanical room where there’s enough space for the unit.

Advantages of Central Water Heaters:

• Convenience: They can provide hot water to multiple locations simultaneously, making them ideal for large homes or buildings.
• Consistent Supply: With properly sized systems, they can provide a continuous supply of hot water. – America Ao O Smith Heater and American Proline Heater and Rheem Heater.
• Energy Efficiency: Modern systems, particularly heat pump and tankless models, are more energy-efficient than older traditional systems. – 50USG, 80USG, and 120USG central water heater

Would you like more details about a specific type of central water heater or guidance on selecting one?

Please Watertec Solution technical team vis WhatsApp or Email. For Central Water Heater Supply and Central Water Heater Repair and Central Water Heater Maintenance